Basic Camera Setup: The Setup Menu

Menus Setup and Playback Shooting,

iSound Settings

Press the dbutton Mz(Setup menu) (A117) MiSound settings

Adjust the following sound settings.

Button sound

Turn button sound On (default setting) or Off. A beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from On (default setting) or Off.

kAuto Off

Press the dbutton Mz(Setup menu) (A117)MkAuto off

If no operations are performed for the selected length of time, the monitor will turn off and the camera enters standby mode (A19) to reduce drain on the batteries. The power-on lamp blinks in standby mode. If no operations are performed for another three minutes, the camera will turn off automatically. Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

CCanceling Standby Mode

Standby mode is canceled when the following buttons are pressed.

•Power switch

•Shutter-release button

128

CNotes on Auto Off

Regardless of the option selected, the monitor will remain on as follows.

•While a menu is displayed: If auto off is set to 30 s or 1 min, it is extended to 3 minutes.

•Slide show playback: maximum of 30 minutes

• AC Adapter EH-62F is connected: 30 minutes