Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

 

Display

Problem

 

Solution

A

 

O(blinks)

Clock not set.

Set clock.

120

 

 

 

 

 

 

B

Battery is running

Prepare to charge or change

14, 16

 

low.

battery.

 

 

 

 

N

Battery exhausted.

Charge or replace battery.

14, 16

 

Battery exhausted.

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn off camera, and allow battery

 

 

 

 

to cool down before resuming

 

 

 

 

use. After five seconds, this

 

 

 

 

message will disappear, the

 

 

P

Battery temperature

monitor will turn off, and the

19

 

Battery temperature

is high.

power-on lamp will blink rapidly.

 

high

After the lamp blinks for three

 

 

 

 

 

 

 

minutes, the camera will turn off

 

 

 

 

automatically, but you can also

 

 

 

 

press the power switch to turn it

 

 

 

 

off manually.

 

 

 

 

 

 

 

 

Q(blinks red)

Camera cannot

•

Refocus.

28, 29

 

focus.

•

Use focus lock.

105

 

 

 

P

Camera cannot

 

 

 

 

perform other

Wait until message clears from

 

 

Please wait for the

 

 

operations until

display automatically when

–

 

camera to finish

 

recording is

recording is complete.

 

 

recording.

 

Technical

complete.

 

 

 

 

 

 

 

 

 

 

 

N

is in “lock” position.

“write” position.

 

 

Memory card is write

Write-protect switch

Slide the write-protect switch to

23

 

 

 

 

Notes

protected.

 

 

 

 

 

 

 

 

 

P

 

• Use an approved card.

138

 

 

 

This card cannot be

 

 

 

• Check that connectors are

22

 

used.

Error accessing

 

 

clean.

 

 

P

memory card.

 

 

 

• Confirm that memory card is

22

 

 

 

This card cannot be

 

 

correctly inserted.

 

 

read.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

144