Steps First

First Steps

Inserting the Battery

Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.

•Charge the battery before first use or when the battery is running low (A16).

1 Open the battery-chamber/memory card slot cover.

Slide the cover latch toward Y(1) and open the battery-chamber/memory card slot cover (2).

2 Insert the battery.

• Confirm that the positive (+) and negative (–) terminals are oriented correctly, as shown on the label at the entrance of the battery chamber, and insert the battery.

• Use the edge of the battery to push the orange battery latch in the direction indicated by the arrow (1) and fully insert the battery (2). When the battery is fully inserted, the battery latch will lock it in place.

Battery latch

BInserting the Battery Correctly

Inserting the battery upside down or backwards could damage the camera. Be sure to check the

battery is in the correct orientation.

3 Close the battery-chamber/memory card slot cover.

•Close the battery-chamber/memory card slot cover

(1), and slide the cover latch to the Zposition (2).

14