Nikon S6400 manual E107, Charge Lamp

B Notes About Connecting the Camera to a Printer

•The battery cannot be charged with connection to a printer, even if the printer complies with the PictBridge standard.

•When Auto is selected for Charge by computer, it may be impossible to print images with direct connection of the camera to some printers. If the PictBridge startup screen is not displayed in the monitor after the camera is connected to a printer and turned on, turn the camera off and disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the printer.

C The Charge Lamp

The following chart explains charge lamp status when the camera is connected to a computer.

Status	Description
Flashes slowly (green)	Battery charging.
	Battery not charging.
Off	If the charge lamp changes from slow flashing (green) to off while the
	power-on lamp is lit, charging is complete.
	• The ambient temperature is not suited to charging. Charge the
	battery indoors with an ambient temperature of 5°C to 35°C (41°F
	to 95°F).
	• The USB cable is not connected correctly, or the battery is faulty.
	Make sure the USB cable is connected correctly and replace the
Flashes quickly (green)	battery if necessary.
	• The computer is in sleep mode and is not supplying power. Wake
	up the computer.
	• The battery cannot be charged because the computer cannot
	supply power to the camera due to the computer’s settings or its
	specifications.

Reference Section

E107