Nikon S6400 manual Problem Cause/Solution Battery is exhausted, Connected while the camera is on

	Problem		Cause/Solution	A
		•	Battery is exhausted.	24
		• The camera automatically turns off to save power if		105
			no operations are performed for an extended
			period of time.
		• The camera or battery have become too cold and		F3
			cannot operate properly.
	Camera turns off without	•	The camera turns off if the Charging AC Adapter is	16
	warning.		connected while the camera is on.
		• The camera turns off if the USB cable connecting it		86, 91,
			to a computer or printer is disconnected.	E39
			Reconnect the USB cable.
		• Inside of the camera has become hot. Leave the		–
			camera off until the inside of the camera has
			cooled, and then try turning it on again.
		•	Camera is off.	25
		• Standby mode for saving power: press the power		2, 25
			switch, the shutter-release button, A button, c
			button, or b (e movie-record) button.
	Monitor is blank.	• When flash lamp flashes, wait until flash has		58
			charged.
		• Camera and computer are connected via USB		86, 91
Technical		•	cable.	104, E93
			Adjust monitor brightness.
		• Camera and TV are connected via audio/video		86, E34
			cable or HDMI cable.
NotesandIndex	Monitor is hard to read.	• Monitor is dirty. Clean monitor.		F6

F8