Nikon S6400 manual Camera Temperature, When recording ends, digital zoom turns off

B Notes About Recording Images and Saving Movies

The indicator showing the number of exposures remaining or the indicator showing the maximum movie length flashes while images are being recorded or while a movie is being saved. Do not open the battery-chamber/memory card slot cover or remove the battery or memory card while an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the memory card.

B Notes About Movie Recording

•Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording movies (F23). Movie recording may stop unexpectedly when memory cards with a lower Speed Class rating are used.

•There may be some degradation in image quality when digital zoom is used. When recording movies, the digital zoom can magnify the image up to 4× the maximum optical zoom ratio.

•When recording ends, digital zoom turns off.

•The sounds of zoom control operation, zoom, autofocus lens drive movement, vibration reduction, and aperture operation when brightness changes may be recorded.

•The following phenomena may be seen in the monitor while recording movies. These phenomena are saved in the recorded movies.

-Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor lighting.

-Subjects that move quickly from one side of the frame to the other, such as a moving train or car, may appear skewed.

-The entire movie image may be skewed when the camera is panned.

-Lighting or other bright areas may leave residual images when the camera is moved.

•Depending on the distance to the subject or the amount of zoom applied, subjects with repeating patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.) in them during movie recording and playback. This occurs when the pattern in the subject and the layout of the image sensor interfere with each other; it is not a malfunction.

B Camera Temperature

•The camera may become warm when shooting movies for an extended period of time or when the camera is used in a hot area.

• If the inside of the camera becomes extremely hot
when recording movies, the camera will automatically
stop recording after ten seconds.
The amount of time remaining until the camera stops
recording (B10s) is displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has
cooled.	10 0

Recording and Playing Back Movies

97