Nikon S6400 manual Error Messages, E120

Error Messages

	Display		Cause/Solution	A
	O(flashes)	Clock not set.		E90
		Set date and time.
	Battery exhausted.	Charge or replace battery.		14, 16
		Battery temperature is high.
		Turn off camera, and allow battery to cool down before
	Battery temperature	resuming use. After five seconds, this message will
		disappear, the monitor will turn off, and the power-on lamp		25
	high
		will flash quickly. After the lamp flashes for three minutes,
		the camera will turn off automatically. Pressing the power
		switch also turns off the camera.
	The camera will turn off	Inside of the camera has become hot.
		Turn off camera, and allow battery to cool down before		–
	to prevent overheating.
		resuming use.
		Camera cannot focus.
	Q(● flashes red)	•	Refocus.	30, 77
		•	Use focus lock.	78
Reference	Please wait for the	Camera cannot perform other operations until saving is
		saving is complete.
	camera to finish	complete.		–
	recording.	Wait until message clears from display automatically when
Section
	Memory card is write	Write-protect switch is in “lock” position.		–
	protected.	Slide write-protect switch to “write” position.
		Write-protect switch of Eye-Fi card is in “lock” position.		–
		Slide the write-protect switch to “write” position.
	Not available if Eye-Fi
		Error accessing Eye-Fi card.
	card is locked.
		• Check that terminals are clean.		18
		• Confirm that Eye-Fi card is correctly inserted.

E120