Nikon S6400 manual Cleaning and Storage, Do not use alcohol, thinner, or other volatile chemicals

Cleaning and Storage

Technical Notes and Index

Cleaning

Do not use alcohol, thinner, or other volatile chemicals.

	Avoid touching glass parts with your fingers. Remove dust or lint with a blower
	(typically a small device with a rubber bulb attached to one end that is pumped to
Lens	produce a stream of air out the other end). To remove fingerprints or other stains
	that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral
	motion that starts at the center of them and working toward the edges. If this fails,
	clean the lens using a cloth lightly dampened with commercial lens cleaner.
Monitor	Remove dust or lint with a blower. To remove fingerprints and other stains, clean the
	monitor with a soft, dry cloth, being careful not to apply pressure.
	Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry cloth.
	After using the camera at the beach or other sandy or dusty environment, wipe off
Body	any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry
	thoroughly. Note that foreign matter inside the camera could cause damage not
	covered by the warranty.

Storage

Turn the camera off when not in use. Be sure that the power-on lamp is off before putting the camera away. Remove the battery if the camera will not be used for an extended period. Do not store the camera with naphtha or camphor moth balls, or in any of the following locations:

•Next to equipment that produces strong electromagnetic fields, such as televisions or radios

•Exposed to temperatures below –10°C (14°F) or above 50°C (122°F)

•Places that are poorly ventilated or subject to humidity of over 60%

To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again.

For storing the battery, follow the precautions in “The Battery” (F3) in “Maximizing Camera Life and Performance” (F2).

F6