Nikon COOLPIXS80BLUE ISound Settings, KAuto Off, 155, Adjust the following sound settings

The Setup Menu

iSound Settings

Tap the bottom tab (A 146) Mz (Setup menu) MiSound settings

Adjust the following sound settings.

Button sound

Turn button sound On (default setting) or Off. When On (default setting) is selected, beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from On (default setting) or Off.

No sound is played with shutter release when some features such as continuous shooting or BSS (best shot selector) are enabled, or when recording movies, even if On is selected.

kAuto Off

Tap the bottom tab (A 146) Mz (Setup menu) MkAuto off

When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A 19) to save power.

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min. Press the shutter-release button to cancel standby mode.

CNotes on Auto Off

Basic Camera Setup

Regardless of the option selected, the monitor will remain on as follows:

• When a setting screen is displayed: three minutes

• During slide show playback: up to 30 minutes

155