Nikon SB-27 instruction manual Selecting a measurement system meters/feet

Selecting a measurement system (meters/feet)

Set the flash shooting distance measurement system in the LCD panel to either meters (m) or feet (ft).

—The system is preset to meters (m) when shipped from the factory.

TTL		f t	m
	M mm	60	18
		30	9
A ZOOM		15	4
M ISO		7	2
		4	1
		2	0.6

Set the flash mode selector from “OFF” to “M” or “AUTO” while holding down the “F” button and select the desired indication (m or ft).

—If you replace the batteries with the SB-27's power ON, the measurement system returns to the default meters (m) system, even if feet (ft) had been previously set.

16