Nikon SB-27 instruction manual Selecting a flash mode, Ttl

Selecting a flash mode

Set the flash mode selector to “AUTO” and flash modes for each camera group automatically become available.

				Flash mode indicator
TTL		f t	m	Flash shooting distance
	mm	60	18
M		30	9
				scale
A ZOOM		15	4
M ISO		7	2	Flash mode selector
		4	1
		2	0.6

Aperture indicator “M” (M/ISO) button

For available flash operations in each camera group, consult the table below.

Camera	Available flash operation	Flash smode	Reference
group		indicator	page.
	･ Automatic Balanced Fill-Flash with
I*/**	TTL Multi Sensor****		P. 24
	･ Center-Weighted/ Spot Fill-Flash
	･ Standard TTL Flash

･Matrix Balanced Fill-Flash

II*/** ･ Center-Weighted/ Spot Fill-Flash P. 26

	･ Standard TTL Flash
III	･ Matrix Balanced Fill-Flash
	･ Center-Weighted/ Spot Fill-Flash		P. 28
	･ Standard TTL Flash
IV	･ Matrix Balanced Fill-Flash		P. 30
	･ Center-Weighted Fill-Flash
V	･ Programmed TTL Auto Flash		P. 32
	･ Standard TTL Flash
VI	･ Standard TTL Flash		P. 36
VII***	･ Non-TTL Auto Flash	R	P. 38

*The SB-27's flash mode indicator changes every time the “M” button is pressed. ** Center-Weighted Fill-Flash/Spot Fill-Flash is not possible with F80-Series/N80-Series

and Pronea 600i/6i cameras.

***Only possible when the camera setting switch is set to ˚. (See page 13.)

****Automatic Balanced Fill-Flash with TTL Multi Sensor is a general term for both 23 3D Multi-Sensor Balanced Fill-Flash and Multi-Sensor Balanced Fill-Flash.