Nikon SB-27 instruction manual Multiple flash operation- Cameras in Groups I thru

Multiple flash operation— (Cameras in Groups I thru

TTL multiple flash operation procedures

See page 66 on usable flash units and accessories for multiple flash operation.

1

2

3

Mount the SB-27 as a master flash unit on the camera.

Connect the master flash unit to the slave flash unit(s).

—Turn OFF all flash units when connecting.

Set the flash mode selector of all the flash units to TTL.

—Do not set the power switch to the STBY position.

NOTE

Using the SB-27 as a slave flash unit (for cameras in Groups I thru VI)

When using the SB-27 as a slave unit, set the camera setting switch to ˚ in order to activate the Forced TTL function (see page 69). Forced TTL simply disables the standby function. If the camera setting switch is set to K, the standby function will work and the slave flash will not fire.

4 Setting up a master flash unit and slave unit(s)

Set the zoom-head position and the flash-to-subject distance on the master flash unit. Set up the slave unit(s) in the same way.

5 Follow the same procedures as in normal TTL Auto Flash mode.

64