Close-up flash operation in AUTO mode (Cameras in

Close-up flash operation using a TTL Remote Cord

When you want to ensure sufficient illumination, or illuminate your subject from the side or the back, detach the SB-27 from the camera and use an optional TTL Remote Cord.

1 Connect the SB-27 to the camera using a TTL Remote Cord.

—Use optional TTL Remote Cord SC-24 when connecting the SB-27 to an F4-Series camera fitted with a High-Magnification Finder (DW-20 or DW-21).

—Use optional TTL Remote Cord SC-17 when connecting the SB-27 to other cameras with an ISO type hot shoe.

2 After first setting the camera’s exposure mode to A or M, set the SB-27’s flash mode selector to “AUTO.”

3 Position the SB-27 properly and adjust the angle.

—Be sure to position the SB-27 and adjust the angle so as to sufficiently illuminate the subject.

58

Page 58
Image 58
Nikon SB-27 Close-up flash operation in Auto mode Cameras, Close-up flash operation using a TTL Remote Cord