Nikon SB-27 Camera settings Lens Use Nikkor lenses With built-in CPU, Metering system *2

Flash operation in AUTO mode (Cameras in

Procedures

Camera settings

Lens in

1use

Nikkor lenses

with built-in CPU

With a G-type Nikkor lens attached to F4-Series, F-801s/ N8008s, F-801/N8008 cameras, the A and M exposure modes cannot be used.

Nikkor lenses

without built-in CPU*4

2Available flash operation*1

Matrix Balanced

Fill-Flash

tø

Center-

Weighted/Spot

Fill-Flash

tø

(except Pronea 600i/6i cameras)

Standard

TTL Flash

t

Center-

Weighted/Spot

Fill-Flash

tø

(except Pronea 600i/6i cameras)

Standard

TTL Flash

t

3Metering system *2

Matrix Metering

Center-

Weighted/Spot

Metering

Desired metering system

Center-

Weighted/Spot

Metering

*1 Press the “M” button to change the SB-27's flash mode indicator.

*2 With an F4-Series camera set to Spot Metering, flash operation is automatically set to Standard TTL Flash mode.

*3 S: Shutter-priority auto, P: Programmed auto, A: Aperture-priority auto, M: Manual *4 Matrix Balanced Fill-Flash operation is only possible with F4-Series camera even when AI-S or AI-type Nikkor lenses, Nikon Series E lenses, and lenses for the

F3AF are mounted. With a non-CPU lens attached to Pronea 600i/6i cameras, set the exposure mode to Manual only. The camera's exposure meter cannot be used. Set and confirm the aperture using the lens aperture ring.

*5 Center-Weighted Fill-Flash/Spot Fill-Flash is not possible with Pronea 600i/6i cameras. Only Standard TTL Flash can be performed when the camera’s exposure mode is set to Manual (M).

26