Nikon SB-27 instruction manual Installing batteries

Installing batteries

Four penlight batteries (1.5V or lower) of any of the following types may be used:

•AA-type alkaline-manganese (1.5V)

•AA-type lithium (1.5V)

•AA-type NiCd (rechargeable) (1.2V)

•AA-type Ni-MH (Nickel Metal Hydride) (rechargeable) (1.2V)

Note: High powered manganese batteries are not recommended for use with this Speedlight.

See page 81 for “Notes on batteries.”

1 Open the battery chamber lid, and set the camera setting switch.

1

2

With cameras in Groups I thru VI, be sure to set the camera setting switch to K, and set it to ˚ for cameras in Group VII.

See pages 12, 69 on camera setting switch.

2 Install four penlight batteries and close the battery chamber lid.

Do not mix battery brands or types, or new and old batteries.

NOTE

Replace the batteries within 30 seconds after turning OFF the power of the SB-27 to preserve data settings.

11