Nikon SB-27 instruction manual Optional accessories

Optional accessories

Sync Cord SC-11 and SC-15

Use Sync Cord SC-11 or SC-15 when using the SB-27 off-camera or mounting the SB-27 on a camera without an accessory shoe, or performing Multiple Flash operation in manual (M) mode with the SB-27. The SC-11 is approx. 25 cm (9.8 in.) long; the SC-15 is approx. 1m (3.2 ft.) long.

TTL Remote Cord SC-17 and SC-24

Use Remote Cord SC-17 for TTL Auto Flash operation when using the SB-27 off-camera. The SC-17 comes with one tripod socket and two TTL multiple flash terminals. The SC-17 is approx. 1.5 m (4.9 ft.) long. Use the SC-24 when the DW-20 or DW-21 is mounted on the F4-Series camera.

TTL Multi-Flash Sync Cord SC-18 and SC-19

Use Multi-Flash Sync Cord SC-18 or SC-19 to connect the flash unit to the multiple flash terminal of the SC-17 or AS-10 for TTL multiple flash operation. The SC-18 is approx. 1.5 m (4.9 ft.) long, and the SC-19 is approx. 3 m (9.8 ft.) long.

TTL Multi-Flash Adapter AS-10

Use multi-flash adapter AS-10 when using more than three flash units for TTL multiple flash operation, or if the slave flash units are not equipped with multiple flash terminals. The AS-10 comes with one tripod socket and three TTL multiple flash terminals.

Sync Terminal Adapter AS-15

Use Sync Terminal Adapter AS-15 to connect the SB-27 with cameras with no sync terminal provided.

Wireless Slave Flash Controller SU-4

Useful for multiple flash photography, the SU-4 features a built-in, movable light sensor and an accessory shoe for attachment of a slave Speedlight. The SU-4’s light sensor not only triggers the slave unit to fire in unison with the master flash, but controls the flash duration of the slave unit in sync with the master unit to provide TTL, non-TTL, or Manual operation.

77