Nikon SB-27 instruction manual Flash operation in Auto mode Cameras in Group, Non-TTL Auto Flash

Flash operation in AUTO mode (Cameras in Group VII:

With cameras in Group VII, be sure to set the camera setting switch (inside the SB-27's battery chamber) to ˚, and choose “AUTO” (in the flash mode selector); the flash mode is automatically set to Non-TTL Auto Flash.

—In non-TTL Auto Flash mode, flash mode indicator ˙ appears in the SB-27's LCD panel.

Procedures

1Lens in use

Nikkor lenses with built-in CPU* Nikkor lenses without built-in CPU

2Available flash operation

Non-TTL Auto Flash

˙

*G-type Nikkor lenses cannot be used.

NOTE

•Set the lens to the same aperture value as in the SB-27 to obtain a correct exposure.

•A usable aperture value appears in the SB-27's LCD panel whenever you press the “F” button.

38