1 - 20 AMERICAN-LINCOLN TECHNOLOGY SMART 2000
Figure 19
Figure 18
ACCELERATOR and DIRECTIONAL CONTROL PEDAL
- (See Figure 18)
The Accelerator and Directional Control Pedal is located
on the floor of the operator’s area. This pedal controls the
machine direction and travel speed.
1. Put foot pressure on the right side of the pedal. The
machine will move forward.
2. Increase the foot pressure on the right side of the
pedal to increase the forward speed.
3. Put foot pressure on the left side of the pedal. The
machine will move in reverse.
4. Increase the foot pressure on the left side of the pedal
to increase the reverse speed.
5. To stop the machine, allow directional control pedal to
return to neutral (center position). Pedal will automati-
cally return to neutral when foot pedal is released, or
put light foot pressure on the opposite end of the ac-
celerator and directional control pedal. If the ma-
chine is moving forward, put light foot pressure on the
left side of the pedal. If the machine is moving in
reverse, put light foot pressure on the
right side of the pedal.
BACK-UP ALARM SWITCH (Option)
The back-up alarm is operated by a switch that is located
under the accelerator and directional control pedal
mounting plate. The alarm makes a loud audible noise
when the machine is being driven in reverse.
FILTER PANEL KNOB (See Figure 19)
The filter panel knob is used to hold the dust control filter
down. It is located in the hopper filter compartment and
will need to be removed periodically for cleaning or
replacement. Removal of the filter panel requires no
tools. The hopper cover must be opened to gain access
to the filter compartment. The panel filter is held in place
by a hinged frame and knob.
To remove the panel filter, turn the knob counterclockwise
and lift the hinged frame. The panel filter can now be lifted
out and cleaned or replaced.
To install the replacement panel filter, place a new filter in
the machine, lower the frame and twist the knob
clockwise to lock the filter in place.
OPERATION OF CONTROLS AND GAUGES - Cont.