GENERAL MACHINE MAINTENANCE (Cont.)

REF ROD END

3.5"

 

REF FRAME-

Figure 36

BRUSH DRIVE

Figure 37

REPLACING THE SCRUB BRUSH

1.Raise the scrub brush deck by pressing the “Scrub Brush” switch on the instrument panel.

2.Press the brush latches in to release the scrub brush.

3.Remove the old scrub brush.

4.Snap the new brush into place.

ADJUSTING THE SCRUB DECK (See Figure 37)

Adjust the center of the rod end to 3.5” from the frame.

COVERS AND LATCHES

The covers have been designed to allow access, either by hinge or removal, to all areas of the machine. No maintenance is required.

SOLUTION LOW WARNING LIGHT

The solution low warning light will illuminate when the solution tank is low. This part of the level control system requires no maintenance. If the system fails to operate, consult the Electrical Troubleshooting Guide.

RECOVERY HIGH WARNING LIGHT

The recovery high warning will illuminate approximately 5 minutes before loss of vacuum to the recovery tank. This part of the level control system requires no maintenance, except for daily cleaning of the tank level switch. If the system fails to operate, consult the Electrical Troubleshooting Guide.

SOLUTION CONTROL (Non-Recycling or Standard)

The solution control knob controls the amount of solution applied to the scrubbing brushes.

The solution control should shut off completely with the knob in the “off” position. If complete shut off does not occur, the control valve should be adjusted.

SOLUTION CONTROL (Recycling or ESP System)

In the recycling mode, the solution control lever is also used to activate the detergent pump. If the detergent pump fails to operate (engine running) when the solution control lever is moved into the low to high range, first check the circuit by manually activating the switch. If the detergent pump does not operate at this time, a further electrical or mechanical check is required (see Electrical Troubleshooting Guide or Detergent Pump Troubleshooting).

 

 

 

1 - 34

AMERICAN-LINCOLN TECHNOLOGY

 

SMART 2000

Page 34 Page 36
Page 35
Image 35
Nilfisk-ALTO 2000 Replacing the Scrub Brush, Covers and Latches, Solution LOW Warning Light, Recovery High Warning Light
Page 34 Page 36

2000 specifications

Nilfisk-ALTO 2000 is a versatile and powerful pressure washer designed to meet the needs of both professional users and homeowners. Renowned for its durability and performance, this machine is an ideal choice for a wide range of cleaning applications, from automotive detailing to heavy-duty industrial tasks.

One of the standout features of the Nilfisk-ALTO 2000 is its robust motor, which delivers impressive pressure levels that can tackle even the most stubborn dirt and grime. With a maximum pressure output of up to 2000 PSI, this machine ensures effective cleaning on various surfaces including concrete, wooden decks, and vehicles. The high flow rate also means users can cover large areas quickly, making it a time-efficient solution for any cleaning job.

Another significant characteristic of the Nilfisk-ALTO 2000 is its innovative design. The machine is equipped with an ergonomic handle and lightweight structure, which enhances maneuverability and ease of use. The wheels provide excellent mobility, allowing the operator to move effortlessly between cleaning tasks. The compact design ensures that it can be stored easily when not in use.

The Nilfisk-ALTO 2000 is also loaded with advanced technologies that enhance its effectiveness. It features a built-in detergent tank that allows users to apply cleaning solutions directly while washing for a more thorough clean. The adjustable pressure settings give users the flexibility to switch between delicate and intense cleaning modes based on the task at hand.

Safety is another priority in the design of the Nilfisk-ALTO 2000. The machine is fitted with protective features, including thermal overload protection and a safety lock for the trigger gun, preventing accidental operation. This ensures peace of mind for users, particularly in environments where multiple individuals may need to use the machine.

Finally, the Nilfisk-ALTO 2000 is built with durable materials that withstand the rigors of regular use. The reliable performance and low maintenance requirements make this pressure washer an investment that pays off over time, providing exceptional cleaning power whenever needed.

In conclusion, the Nilfisk-ALTO 2000 combines impressive pressure capabilities, thoughtful design, and advanced safety features, making it an outstanding choice for both professional and residential cleaning needs.
Top Page Image Contents