SERVICE INSTRUCTIONS (Cont.)

HOPPER SERVICE

Figure 29

H34REF

Figure 30

HOPPER

The hopper houses the debris compartment, the dust control filter and the removable dust baffle. For maximum performance and service life, keep the hopper clean and inspect the seals and flaps daily. Clean the hopper prior to parking the sweeper at the end of the day. A clean hopper will make inspecting the flaps and seals much easier and will prevent premature deterioration of hopper components. Do not leave the hopper full of debris while in storage or when parked for extended periods of time

CLEANING THE HOPPER

Once the hopper has been emptied the insides of the hopper should be rinsed out with water.

AJDUSTING THE HOPPER SWITCH

With hopper fully closed and seated and bolt loose, rotate the bracket clockwise until the switch clicks. Retighten bolt. (See Figure 30).

DUST CONTROL FILTER

The dust control filter should be checked daily for damage and cleaned if necessary. A damaged filter must be replaced to prevent damage to other dust control system components. Inspect the filter for tears in the filter media or excessive dirt lodged in the pleats. A tear in the filter media will allow dirt to pass through the filter and can be easily seen as a dirty patch on the top side on the filter. Cleaning of the filter is necessary when the filter shaker fails to adequately clean the pleats.

CHECKING THE DUST CONTROL FILTER

1.Park the machine on a smooth level surface, turn the key switch to the “O” position and engage the parking brake.

2.Raise the hopper lid for access to the filter compartment.

3.Turn the filter latch, lift the filter frame and remove the filter.

4.Inspect the panel filter for tears and clean or replace if necessary.

5.Reinstall the filter, lower the filter frame and engage the filter latch.

6.Close the hopper cover.

CLEANING THE DUST CONTROL FILTER

Clean the dust control filter when the shaker fails to adequately clear the filter. The filter can be cleaned with compressed air not to exceed 100 PSI.

To clean the filter with compressed air, apply the compressed air to the top side of the panel to back flush the lodged dirt from the filter pleats. Be careful to not damage the filter media while cleaning. The filter can be cleaned with a solution of soap and water. If this cleaning method is used do not use the filter until it has completely dried.

 

 

 

1 - 30

AMERICAN-LINCOLN TECHNOLOGY

 

SMART 2000

Page 31
Image 31
Nilfisk-ALTO 2000 manual Hopper Service, Cleaning the Hopper, Ajdusting the Hopper Switch, Dust Control Filter

2000 specifications

Nilfisk-ALTO 2000 is a versatile and powerful pressure washer designed to meet the needs of both professional users and homeowners. Renowned for its durability and performance, this machine is an ideal choice for a wide range of cleaning applications, from automotive detailing to heavy-duty industrial tasks.

One of the standout features of the Nilfisk-ALTO 2000 is its robust motor, which delivers impressive pressure levels that can tackle even the most stubborn dirt and grime. With a maximum pressure output of up to 2000 PSI, this machine ensures effective cleaning on various surfaces including concrete, wooden decks, and vehicles. The high flow rate also means users can cover large areas quickly, making it a time-efficient solution for any cleaning job.

Another significant characteristic of the Nilfisk-ALTO 2000 is its innovative design. The machine is equipped with an ergonomic handle and lightweight structure, which enhances maneuverability and ease of use. The wheels provide excellent mobility, allowing the operator to move effortlessly between cleaning tasks. The compact design ensures that it can be stored easily when not in use.

The Nilfisk-ALTO 2000 is also loaded with advanced technologies that enhance its effectiveness. It features a built-in detergent tank that allows users to apply cleaning solutions directly while washing for a more thorough clean. The adjustable pressure settings give users the flexibility to switch between delicate and intense cleaning modes based on the task at hand.

Safety is another priority in the design of the Nilfisk-ALTO 2000. The machine is fitted with protective features, including thermal overload protection and a safety lock for the trigger gun, preventing accidental operation. This ensures peace of mind for users, particularly in environments where multiple individuals may need to use the machine.

Finally, the Nilfisk-ALTO 2000 is built with durable materials that withstand the rigors of regular use. The reliable performance and low maintenance requirements make this pressure washer an investment that pays off over time, providing exceptional cleaning power whenever needed.

In conclusion, the Nilfisk-ALTO 2000 combines impressive pressure capabilities, thoughtful design, and advanced safety features, making it an outstanding choice for both professional and residential cleaning needs.