USER MANUAL

ENGLISH

WARNING!

Do not use the machine on incline.

Do not use the machine in particularly dusty areas.

While using this machine, take care not to cause damage to people or objects.

Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.

Do not put any can containing fluids on the machine.

The machine working temperature must be between 0°C and +40°C.

The machine storage temperature must be between 0°C and +40°C.

The humidity must be between 30% and 95%.

When using floor cleaning detergents, follow the instructions on the labels of the detergent bottles.

To handle floor cleaning detergents, wear suitable gloves and protections.

Do not use the machine as a means of transport.

Do not allow the brush/pad to operate while the machine is stationary to avoid damaging the floor.

In case of fire, use a powder fire extinguisher, not a water one.

Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.

Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the openings free from dust, hairs and any other foreign material which could reduce the air flow.

Do not remove or modify the plates affixed to the machine.

This machine cannot be used on roads or public streets.

Pay attention during machine transportation when temperature is below freezing point. The water in the recovery tank or in the hoses could freeze and seriously damage the machine.

Use brushes and pads supplied with the machine and those specified in the User Manual. Using other brushes or pads could reduce safety.

In case of machine malfunctions, ensure that these are not due to lack of maintenance. Otherwise, request assistance from the authorised personnel or from an authorised Service Center.

If the machine

does not work properly

is damaged

has water or foam leaks

has been left outdoors exposed to bad weather conditions

is wet or has been dropped into water

turn it off immediately and contact Nilfisk Alto Service Center or a qualified technician.

If parts must be replaced, require ORIGINAL spare parts from an Authorised Dealer or Retailer.

To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this Manual, must be performed by the authorised personnel or by an authorised Service Center.

Carefully read all the instructions before performing any maintenance/repair procedure.

Do not wash the machine with direct or pressurised water jets, or with corrosive substances.

The machine must be disposed of properly, because of the presence of toxic-harmful materials (electronic components, etc.), which are subject to standards that require disposal in special centres (see the Scrapping chapter).

909 6315 000(4)2009-11 A

SCRUBTEC 343E

5

Page 43
Image 43
Nilfisk-ALTO 343E manuel dutilisation English

343E specifications

The Nilfisk-ALTO 343E is a high-performance industrial vacuum cleaner designed to offer exceptional versatility and efficiency in various commercial and industrial cleaning applications. This model stands out for its robust build quality, advanced features, and user-friendly design, making it an ideal choice for businesses seeking effective solutions for dust and debris control.

One of the main features of the Nilfisk-ALTO 343E is its powerful motor which delivers strong suction capabilities. With a maximum airflow of up to 400 m³/h, this vacuum is capable of handling a wide range of materials, including dust, chips, and liquids. The machine is equipped with a two-stage turbine that ensures efficient performance while maintaining low noise levels, making it suitable for use in environments where noise reduction is essential.

The 343E incorporates an advanced filtration system that significantly enhances its performance. It features a robust polyester filter that effectively captures fine particles, ensuring cleaner air is released back into the environment. Additionally, the filter is easy to clean, thereby extending its lifespan and reducing maintenance costs. The vacuum also provides an optional HEPA filter, which is vital for environments that require high levels of air purity, such as healthcare facilities or laboratories.

Another characteristic that sets the Nilfisk-ALTO 343E apart is its user-friendly design. The vacuum cleaner is built with ergonomic considerations, featuring an adjustable handle and wheels that make maneuvering around tight spaces effortless. The lightweight design further enhances mobility, allowing operators to transport the machine with ease.

The Nilfisk-ALTO 343E is also equipped with a large-capacity collection tank that can hold up to 35 liters, enabling extended cleaning sessions without frequent emptying. The tank features a quick-release design for hassle-free disposal of collected debris. Furthermore, the vacuum is designed for versatility, accommodating various tools and accessories to adapt to different cleaning tasks.

In summary, the Nilfisk-ALTO 343E combines powerful suction, advanced filtration, user-centric design, and versatility, making it an indispensable tool in sectors such as manufacturing, construction, and maintenance. Its combination of efficiency and ease of use ensures that it meets the demanding needs of modern industrial cleaning requirements.