Nilfisk-ALTO 91WS manual Machine Controls, C0612, C0613, Side Broom Lift Handle, Main Broom Lever

MACHINE CONTROLS

C-0611
C0611	FIGURE 5

C0612	FIGURE 6
	MAIN BROOM
	ADJUSTMENT
TO LOWER	TO RAISE
BROOM	BROOM
C0613/9705
C0613	FIGURE 7

SIDE BROOM LIFT HANDLE

The Side Broom lift handle is located at the rear of the sweeper on the right side. The lift handle raises and lowers the side broom. Broom rotation stops when the side broom is raised.

-To raise the side broom, pull the handle out and down to lock the broom in the raised position.

-To lower the side broom, move handle up and forward into the slot.

MAIN BROOM LEVER

The main broom lever is located on the left side of the console. The main broom lever has three positions that control the main broom sweep height.

To lower the main broom, grasp the lever and move it to the right out of the “UP” position and place the lever in the “SWEEP” or “FLOAT position.

The “SWEEP” position is for normal sweeping and should be used for most sweeping conditions.

The “FLOAT” position is used for sweeping very uneven surfaces only. Using the float position will cause premature wear on the main broom if used under normal operating conditions for extended periods of time.

MAIN BROOM ADJUSTMENT

The main broom adjustment is located at the rear of the machine. Adjust the main broom sweep height to compen- sate for wear of the broom bristles. Check the main broom sweep height regularly and adjust as necessary. (See “Main Broom Service” in this manual)

American-Lincoln	1 - 11
91 WS