Nilfisk-ALTO 91WS Machine Controls, Forward/Reverse, Control Handle, Filter Manifold Latch, C0609

MACHINE CONTROLS

FILTER MANIFOLD LATCH

The filter manifold latch is located on the hinged filter manifold assembly. The latch must be disengaged before dumping the hopper or removing the dust filter. Apply slight down pressure on the edge of the manifold assembly to ease removal.

To disengage the filter manifold latches, apply slight down pressure to the manifold assembly and lift the latch off the catch.

C0609	FIGURE 8
			HOPPER
			DUMP
			HANDLE
			LIFT
			HANDLE
			TO DUMP
			HOPPER
	2
			HOPPER
	1		DUMP
			HANDLE
		3	4
			LIFT
			HANDLE
			TO DUMP
			HOPPER

HOPPER DUMP HANDLE

The hopper dump handle is located on the hopper and is used for dumping debris. A mechanical interlock prevents the handle from being moved out of the stowed position before the filter manifold assembly has been lifted away from the hopper.

To dump the hopper, disengage the filter latch, lift the manifold assembly then rotate the dump handle out of the stowed position and lift.

To stow the handle, replace the handle to the stowed position, lower the filter manifold assembly and engage the filter latch.

C0608	FIGURE 9
				FORWARD/REVERSE CONTROL HANDLE
	FORWARD/REVERSE			The forward/reverse control handle is located at the rear of
				the machine. The control handle extending across the rear
	CONTROL HANDLE
				of the machine activates the belt driven dead-man clutch in
	FORWARD			the drive system.
MAIN	BATTERY CONDITION	- +	ON	To drive the machine forward, move the control handle
SWEEP
BROOM
FLOAT
UP	NEUTRAL			forward.
	CHECK WHILE OPERATING	CB-1 CB-2	FILTER SHAKER
			OFF
	REVERSE			To drive the machine backward, move the control handle
				back.
				The handle returns to neutral automatically when released.
C0614	FIGURE 10
1-12				American-Lincoln
				91 WS