Nokia 3585i manual Nokia Connection Manager, Switch connection type

Nokia Connection Manager

3 Nokia Connection Manager

Nokia Connection Manager is a utility that allows you to select or change the type of connection between your phone and PC.

You may need to use Connection Manager to select the type of connection you want Nokia Content Copier to use during various stages of the process. For example, if you are trying to copy data from one phone to another and the phone containing the data you want to copy requires an IR connection, click

Content Copier Connection button to launch Connection Manager. Then select the correct connection3 option for the source phone.

Switch connection type

1Establish the appropriate connection between your phone and PC

(using IR or cable), then double-click the Connection Manager tray

icon (or select the Connection option from a PC Suite application menu).

2Click the button that corresponds to the desired connection type:

Cable

	Bluetooth
Infrared

Selected/enabled buttons are indicated by their green color.

3Allow Connection Manager to detect your phone.

4Click OK to return to Nokia PC Suite or the desktop.

If your phone is not detected within 10 seconds, switch the connection type off, then on again. This action forces Connection Manager to detect your phone again.

Note: If you are copying data from one phone to another and the source phone uses an IR connection, interrupt the IR connection between source phone and PC. Allow the Windows warning message regarding interrupted IR communications to disappear before changing the connection back to the DKU-5 data cable. By doing so, you allow Connection Manager to detect your phone more quickly.

Important: Even though your Nokia 3585i phone does not support the Bluetooth wireless technology, Bluetooth support is included for compatibility with other Nokia phones.

Disable Connection Manager for wireless modem use

When you close one of the PC Suite applications, Connection Manager may not always release the COM port assigned to your cable or IR connection. Before Windows Dial-up Networking or other data/fax software can communicate with your phone using the DKU-5 data cable, you may need to launch Connection Manager and turn off cable communications. This disables automatic detection of your phone and releases the COM port for use by other Windows applications.

To disable Connection Manager, double-click the tray icon , then click the appropriate buttons to disable cable communications.

[ 5 ]