Configure your data and fax software

9 Configure your data and fax software

Before you can use your phone to send and receive digital data and fax calls, you must configure your data software so that it uses your phone rather than your existing modem. You may consider creating a separate set of dialing properties to use when your phone is connected to your computer, rather than changing any existing settings.

The following pages are designed to help you configure some of the more popular applications to be used with your Nokia phone

OBSERVE THE FOLLOWING BEFORE MAKING OR RECEIVING DIGITAL DATA OR FAX CALLS

You must subscribe to digital data and fax services with your service provider.

Your phone must be powered up, and you must be in a digital network. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

Your PC’s infrared port must be configured properly (internal or external port).

You must establish a connection connection between your PC and your phone.

Your data software must be running and configured to recognize your Nokia phone as the active modem.

CONFIGURE YOUR DATA SOFTWARE

Before you can use your phone as a wireless modem, you must configure your data software so that it uses your phone as the active modem (rather than your existing modem). The following pages are designed to help you configure some of the more popular applications for digital data and fax calls.

• USE MICROSOFT DIAL-UP NETWORKING

You may be using Microsoft’s Dial-up Networking feature to connect to your Internet service provider, or to make a remote

9

connection to your corporate network (including corporate e-mail server using Microsoft Outlook, or Lotus cc:Mail).

 

Rather than altering the existing configurations you use when dialing with your existing modem, consider creating a new connection exclusively for use with your Nokia phone (as detailed below).

GATHER CONFIGURATION INFORMATION

You need the phone number for your Internet service provider or for your company’s remote access server. When testing the new connection, you also need your user name and password.

Create a new connection

1Double-click the My Computer icon, then double-click the Dial-up Networking folder (Windows 2000 and Windows ME users: Click Start, point to Settings, then click Dial-up Networking).

2Double-click the Make New Connection icon.

3Type a name for your new connection (example: Internet-Nokia phone).

4Click the drop-down arrow and select your Nokia phone as the modem to use, then click Next.

5Enter the area code, telephone number, and country code (if necessary), then click Next.

6Click Finish to save the new configuration in your Dial-up Networking folder.

7Make sure to configure any necessary network parameters for this connection prior to dialing (IP address of DNS or WINS, etc.).

Note: For more information on configuring your network connection, please consult your Internet service provider or your company’s help desk.

Connect to the network

Make sure you establish a connection between your phone and PC (using the DLR-3P cable or IR) before making a digital data call.

1 Double-click the new connection (example: Internet-Nokia phone).

[ 29 ]

Page 33
Image 33
Nokia 6360 manual Configure your data and fax software, Configure Your Data Software, USE Microsoft DIAL-UP Networking