FIRST TIME INSTALLATION
Adjust motor for Astra/Hotbird
To continue the installation you now have to determine the angle to Astra 1/Hotbird. The motor and the antenna must be adjusted towards the Astra 1 satellites on 19.2° East (Hotbird satellites on 13° East) as this is the refer- ence setting. All other preprogrammed satellite positions are oriented relative to Astra 1/Hotbird.
You also have to mount the antenna at a proper place outdoors.
How to do all this, please read the separate fitting in- structions for the SatScan or DiSEqC positioner.
Predefined channel
Select the predefined channel that will give the best Signal qual- ity (SNR) bar indication. Within a few seconds you will get picture from the channel in the background.
Adjust motor |
|
• If necessary, fine tune the motor with the | buttons on the |
remote control. |
|
As you now have a picture in the background, it is time to per- form a Channel search procedure.
•Press OK......
....and you will get the Channel search menu.
The most common is to start from the “Automatic search” line. (You can always make a Manual or Advanced Search later on.)
•On the line Automatic Search select the satellite from which you want to search for channels, for example Astra.
•Press OK......
.......and you get the antenna adustment menu
•If necessary, adjust the motor until the Signal strength (AGC) and the Signal quality (SNR) are optimal. Please note, that this will only affect the present satellite position.
GB 21
