S e t u p y o u r p h o n e

Replace the back cover

1. Set the back cover on the phone with the cover tabs aligned with the slots in the phone.

2. Slide the back cover toward the top of the phone until the back cover is securely in place.

Charge the battery

Note: Before you use a charger with this device, check its model number. This device is intended for use when supplied with power from the AC-3 or AC-4 charger.

1.Plug the charger transformer into a standard wall outlet.

2.Insert the charger output plug into the round jack

at the bottom end of the phone.

After a few seconds, the battery indicator on the display starts to scroll from

bottom to top. If the battery

is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

The ACP-12, ACP-9, ACP-8, ACP-7, and the LCH-12 can also be used to charge the phone, but it must be used with the CA-44 adapter included in the box:

1.Plug the charger transformer into a standard wall outlet.

2.Insert the charger output plug into the CA-44 adapter jack. Insert the CA-44 plug into the jack on the bottom of the phone.

16

Page 17
Image 17
Nokia Mobile Phones Replace the back cover, Charge the battery, Plug the charger transformer into a standard wall outlet