Nokia Mobile Phones manual Switch your phone on or off, Connect the headset, Make a call, Keypad

S e t u p y o u r p h o n e

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

■Switch your phone on or off

1.To switch your phone on or off, press and hold the end key for at least 4 seconds.

2.Enter the lock code, if necessary, and select OK. See "Phone lock," p. 69.

Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

■Connect the headset

A compatible headset may be purchased with your phone or separately as an enhancement. See "Enhancement settings," p. 68.

1. Plug the headset connector into the Pop-Port connector at the bottom end of your phone. appears in the standby mode.

2. Position the headset on your ear.

With the headset connected, you can make, answer, and end calls as usual:

• Use the keypad to enter numbers.

• Press the call key to place a call.

• Press the end key to end a call.

You can also plug a compatible headset into the 2.5-mm headset jack on the right side of your phone to allow hands-free operation.

See "Enhancement settings," p. 68.

■ Make a call

Before making or receiving a call, fully extend the antenna.

Keypad

1.Enter the phone number (including the area code), and press the call key. (To delete a character to the left of the cursor, select Clear.)

2.Press the end key to end the call, or select End call to cancel the call attempt.

17