Factory settings

Reset some of the settings to their original values. You need the lock code. See “Lock code,” p. 8.

Positioning

With the positioning service you can receive information from service providers about local issues such as weather and traffic conditions, based on the location of your device (network service).

To enable a positioning method, select Positioning methods, scroll to the positioning method, and select Options > Enable. To stop using it, select Options > Disable.

To define the positioning server access point, select Positioning server > Access point and the desired access point. Then select Server address, and enter the domain name or URL address of the server.

Phone

Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or Network.

Call

Send my caller ID (network service)—to set your phone number to be displayed

(Yes) or hidden (No) from the person whom you are calling. The value may be set by your service provider when you subscribe to the service (Set by network).

Call waiting (network service)—to set the network to notify you of a new incoming call while you have a call in progress. To request the network to activate call waiting, select Activate. To request the network to deactivate call waiting, select Cancel. To check whether the function is active, select Check status.

Reject call with SMS—to enable rejecting phone calls with a text message. See “Answer or reject a call,” p. 23.

Message text—to enter a text to be sent when you reject a call with a text message

Image in video call—to select a still image to be shown instead of the video when you deny video sending in a video call

Automatic redial—to set the phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. Press the end key to stop automatic redialing.

76

Page 76
Image 76
Nokia RM-230 manual Phone, Factory settings, Positioning, Call