2.Attach two Base Pads (81) to the base of the Uprights (85) in the indicated locations with two 1" Tek Screws (82).
3.With the help of a second person, carefully tip the treadmill onto its other side as shown. Partially fold the Frame (55) so that the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled.
Insert the other Extension Leg (97) into the indi- cated bracket on the base of the Uprights (85) as shown.
Attach the Extension Leg (97) with two Extension Leg Bolts (87), two 5/16" Star Washers (110), and two Extension Leg Nuts (91) as shown. Firmly tighten the Extension
Leg Bolts.
4.Attach two Base Pads (81) to the base of the Uprights (85) in the indicated locations with two 1" Tek Screws (82). Note: One replacement Base Pad may be included. Use the Base Pad to replace any Base Pad that becomes worn.
With the help of a second person, carefully tip the treadmill down so that all four Base Pads
(81)are resting on the floor and the Uprights
(85)are in the vertical position.
2 |
|
| 85 |
| 81 |
| 82 |
81 | 82 |
| |
3 |
|
85 |
|
| 110 |
| 87 |
91 |
|
| 97 |
| 55 |
4 |
|
85 |
|
81 |
|
82 |
|
82 | 81 |
| |
7 |
|
