4. SYMPTOM: THE HEART RATE MONITOR DOES NOT FUNC:rlON PROPERLY
a. SeeHow toUse the CardioTrack Heart Rate Monitoron pages 8 and 9, and Pulse Display on page 13.
5. SYMPTOM: THE WALKING BELT IS OFF-CENTER WHEN WALKED ON
a. If the walking belt has shifted to the left, first remove the key
and UNPLUG THE POWER CORD. Using the includedallen
wrench, turn the left rear miler adjustment bolt clockwise, and
the right bolt counterclockwise, 1/4 of aturn each. Becareful not
to overtighten the walking belt. Plug inthe power cord,insert the
key and runthe treadmillfor a few minutes. Repeat untilthe
walking belt is centered.
b. If the walking belt has shifted to the right, first remove the
key and UNPLUG THE POWER CORD. Using the alien wrench,
turn the left rear relier adjustment bolt counterclockwise, and the
right bolt clockwise, 1/4 of aturn each. Be careful not to over-
tighten the walking belt. Plug in'the power cord, insert the key
and run the treadmill for afew minutes. Repeat until the walking
belt is centered.
c. If the walking belt slips when walked on, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench, turn
both rear roller adjustment bolts clockwise, 1/4 ofa turn. When
the walking belt is correctly tightened, youshould be ableto lift
the edges of the walking belt 3 to 4 inches offthe walking plat-
form. Be careful to keep the walking belt centered. Plug in the
power cord, insert the key and run thetreadmill for afew min-
utes. Repeat untilthe walking belt is properlytightened.
6. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON
a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. If the walking belt isovertightened, treadmill performance may
decrease and the walking belt may be permanently damaged.
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is correctly tightened,
you should be able to lift the edges of the walking belt 3to 4
inches off the walking platform. Be careful to keepthe walking
belt centered. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is prop-
erly tightened. Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our Customer Service Department toll-free.
21