8.After the INCLINE TRAINER is placed in the location where it will be used (refer to HOW TO MOVE THE INCLINE TRAINER below), make sure that both Rear Feet (66) and both front Wheels (not shown) rest firmly on the floor. If the INCLINE TRAINER rocks even slightly, turn the right Rear Foot clockwise or counter- clockwise until the rocking motion is eliminated.
8 |
66 |
9.Make sure that all parts are properly tightened before you use the INCLINE TRAINER. Keep the included allen wrenches for adjustment purposes. To protect the floor or carpet from damage, place a mat under the
INCLINE TRAINER.
HOW TO MOVE THE INCLINE TRAINER
Before moving the INCLINE TRAINER, adjust the |
|
|
incline to 30% and then unplug the power cord. | Rear |
|
Note: It may be necessary to disconnect the CATV | Tip | |
cable and the network wire from the INCLINE | Wheels | |
TRAINER, depending on how far the INCLINE |
| Handrails |
TRAINER will be moved. | Lift |
|
Due to the size and weight of the INCLINE |
| |
Here |
| |
TRAINER, moving it requires two persons. While |
| |
one person lifts the indicated end of the INCLINE |
|
|
TRAINER, firmly hold the handrails and tip the IN- |
|
|
CLINE TRAINER forward until it rolls on the front |
|
|
wheels. Carefully move the INCLINE TRAINER to |
| Front Wheels |
the desired location and then lower it back to the |
| |
level position. Note: Another way to move the IN- |
|
|
CLINE TRAINER is to have one person stand on |
|
|
each side of it, lift the frame, and move it on the rear wheels. |
|
|
CAUTION: To reduce the risk of injury, use extreme caution while moving the INCLINE TRAINER. Do not attempt to move the INCLINE TRAINER over uneven surfaces.
9
