6. Finger tighten three Handrail Bolts (64) with | 6 |
|
|
three Star Washers (90) into the Right Upright |
|
| |
|
|
| |
(74). Next, finger tighten three Handrail Bolts |
|
|
|
with three Upright Star Washers (not shown) into |
|
|
|
the Left Upright (73). Then, firmly tighten the six | 73 |
|
|
Handrail Bolts. |
|
|
|
|
|
| 64 |
|
|
| 90 |
|
|
| 74 |
|
|
| 90 |
|
| 64 |
|
7. Slide the Right Upright Sleeve (96) up against | 7 |
|
|
the console assembly. Attach the Right Upright |
|
| |
|
|
| |
Sleeve with two 3/4" Screws (4). |
|
|
|
Attach the Left Upright Sleeve (not shown) to |
|
|
|
the Left Upright (73) as described above. | 73 |
|
|
|
|
| 4 |
|
|
| 96 |
|
| 4 | 74 |
|
|
| |
8. With the help of a second person, raise the front | 8 |
|
|
of the treadmill and insert the crossbar on the |
|
| |
|
|
| |
Base (83) into the cutout in the cardboard stand |
|
|
|
as shown. Have the second person hold the |
|
|
|
treadmill to prevent it from moving forward |
|
|
|
or backward. |
|
|
|
Firmly tighten the four Upright Bolts (72). |
|
| 72 |
|
|
| |
With the help of a second person, lower the |
|
|
|
treadmill off the cardboard stand. |
|
|
|
|
| 83 | Cardboard |
| 72 |
| |
|
| Stand | |
|
|
|
9.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 26). To protect the floor or carpet from damage, place a mat under the treadmill.
9
