Nortel Networks 1140E manual Time offset, About your programmable buttons

Telephone setup

Time offset

When your IP Phone 1140E is located in a different time zone than your system, the display shows the system time instead of the local time. The Time Offset feature allows you to adjust the time that appears on the display. Before you begin, calculate the time difference, in hours, between the server time and local time.

To change the time that appears on your telephone display to local time, use the following steps:

1.Press Feature *510.

2.Press Change.

3.Press * to switch between adding or subtracting time.

4.Using the dialpad, enter the number of hours between local time and system time.

Note: Press # to enter half-hour increments.

5.Press OK.

Note: It may take up to 1 minute for the change to appear on the display.

About your programmable buttons

Your System Administrator assigns the six programmable buttons as line, intercom or memory buttons. The label for each button appears on the display next to the button. For more information, see your System Administrator.

Memory buttons

These are buttons that are not assigned as line or intercom buttons. Memory buttons store internal and external phone numbers or features to give you one-touch dialing or feature activation.

Program memory buttons

You can program a memory button with a new number or feature.

27