24First time installation of the Nortel IP Phone 1535

When you log in to Admin Mode and make administrative changes on the IP Phone 1535, you must actively log out of the Admin Mode when finished in order to prevent unauthorized access to administrative functions by subsequent users. Note that simply resetting or rebooting the IP Phone 1535 does not automatically log you out of your active Admin Mode session.

Logging out of the IP Phone 1535 Admin mode:

Step Action

1From the Main Menu, select Settings > System Settings > Admin, and press OK.

2Select Logout, and press OK.

—End—

Installing the Nortel IP Phone 1535 using LAN

Step Action

1Insert the RJ-45 cable into the LAN port at the back of the IP Phone 1535. For more information, see Figure 2 "IP Phone 1535 connection ports " (page 17)

2Connect the other end of the LAN cable into an active LAN connection port on the network.

—End—

Enabling the LAN connection profile

To establish an active network connection, you must configure the IP Phone 1535 to operate in either of two network connection profiles: LAN or WiFi.

The IP Phone 1535 is preconfigured to make a network connection using LAN over an Ethernet switch or router. Thus, the LAN connection profile is enabled on the IP Phone 1535 by default.

Step Action

1From the Main Menu, select Settings >Profile and press OK.

2Select LAN >Enable (the LAN connection profile is enabled on the IP Phone 1535 by default).

3When asked to confirm the change, select Yes to accept.

Multimedia Communications Server 5100

IP Phone 1535 Installation and Configuration

NN43160-103 01.02 Standard

Release 3.5 20 November 2006

Copyright © 2006, Nortel Networks

Nortel Networks Confidential

Page 24
Image 24
Nortel Networks manual Installing the Nortel IP Phone 1535 using LAN, Enabling the LAN connection profile