Accessing and modifying the LAN Network Settings 25
—End—
Accessing and modifying the LAN Network Settings
To configure the IP Phone 1535 with network settings particular to your LAN environment, you must access and configure the parameters of the Network Settings option. With the LAN Network connection profile enabled, you can access and configure the parameters of the Network Settings configuration options:
Step Action
1From Main Menu, select Settings > Profile > LAN > Settings > Network Settings, and press OK to accept.
2Select the appropriate configuration options and set network parameters (specific to your network configuration) for the LAN connection profile:
a.Details: Displays the network configuration settings (MAC address, DHCP, IP address, Subnet Mask, Gateway and DNS) as currently configured on the IP Phone 1535.
b.DHCP: Used to set DHCP server information (for
DHCP must be disabled to access further configuration options (IP Address, Subnet Mask, Gateway, and DNS1/DNS2 options). If you set DHCP to enabled, these options are automatically configured (through the network DHCP server) after the IP Phone 1535 connects to the network.
If manually configuring the DHCP options, the IP Phone 1535 will attempt to connect to the network using the parameters you set. Should a connection failure occur in using your manual DHCP values, the IP Phone 1535 will retain its current configuration values. Check your values for correctness and retry the connection.
c.IP Address: View or change network IP address information.
d.Subnet Mask: View or change the Subnet Mask information.
e.Gateway: View or change the default Gateway Address information.
f.DNS1/DNS2: View or change the primary and secondary Domain Name Servers.
Multimedia Communications Server 5100
IP Phone 1535 Installation and Configuration
Release 3.5 20 November 2006
Copyright © 2006, Nortel Networks | Nortel Networks Confidential |