Using the Model 5625HD EtherSpeed Switch Module
2-2 206208-A
Connecting to Ethernet Hubs and Network Devices
You connect the ports of the Model 5625HD switch module to the front panel,
wired as MDI-X connections. This wiring allows you to use a straight-through
cable between the Model 5625HD switch module and the patch panel.
To connect the ports on the patch panel to another Ethernet switch or an Ethernet
hub, follow these guidelines:
Personal computers (PCs) and servers typically have network interface
controllers (NICs) that are configured as MDI connections. To connect these
devices, use a straight-through cable.
Hubs and other switches typically have connectors that are configured as
MDI-X. Some hubs and switches have ports th at are set by a toggle switch for
either MDI or MDI-X operation.
To connect a port set for MDI-X to the Model 5625HD switch module
port, use a crossover cable.
To connect a port set for MDI to the Model 5625HD switch module port,
use a straight-through cable.
For connector specifications for MDI-X ports, refer to AppendixB, “Cables and
Connectors.”