
Using the Model 5625HD EtherSpeed Switch Module
2-12 206208-A
Default Port ConfigurationThe Model 5625HD switch module is shipped preconfigured with the settings
listed in Table2-1.
Predefined SpeedView ConfigurationsSpeedView offers several predefined configurations. You may simply choose one
of these without having to configure individual ports. Predefine d configurations
are available for the following applications:
• All transparent switching with no Spanning Tree support
• All transparent switching with IEEE 802.1d Spanning Tree support
You must enter additional configuration information if you are using any of the
following features:
•ATM
• VLANs
• Filtering
• Combinations of bridging modes and Spanning Tree Protocol not offered as
defaults
Instructions for using these features appear in Using SpeedView 4.0 for Windows
and Release Notes for SpeedView 4.1.
Table2-1. Factory Defaults for the Model 5625HD Switch Module
Parameter Factory Default Configurable Options
Switching mode Transparent Transparent
Spanning Tree Protocol None None, IEEE
State Enable Enable/Disable
Filters Disable (none) Enable/Disable
Port speed/display Auto Auto 10/100
Spanning tree group 2 2–32
Priority 128 0–255
Path cost 10 1–65535