26First time installation of the IP Phone 1535
Step Action
1From the Main Menu, select Settings > System Settings > Admin, and press OK.
2Select Logout, and press OK.
—End—
Connecting the IP Phone 1535 to the LAN
To connect the IP Phone 1535 to a LAN you must make an
Step Action
1Insert the
2Connect the other end of the LAN cable into an active LAN connection port on the network.
—End—
Enabling the LAN connection profile
To establish an active network connection, you must configure the IP Phone 1535 to operate in either of two network connection profiles: LAN or WiFi.
The IP Phone 1535 is preconfigured to make a network connection using LAN over an Ethernet switch or router. Thus, the LAN connection profile is enabled on the IP Phone 1535 by default.
Step Action
1From the Main Menu, select Settings >Profile and press OK.
2Select LAN >Enable (the LAN connection profile is enabled on the IP Phone 1535 by default).
3When asked to confirm the change, select Yes to accept.
—End—
Nortel Communications Servers
Nortel IP Phone 1535 Installation and Commissioning
Release 4.0/SN10 28 October 2009
Copyright © 2009, Nortel Networks
