Digital Telephone IP Adapter Installation and Administration Guide 43
January2005 Digital Telephone IP Adapter description
Telephones
This section lists the telephones, features, and modules supported by the Digital
Telephone IP Adapter unit.

Supported digital telephones

Digital Telephone IP Adapter units support the following digital telephone sets
with display:
Your digital telephone must have a one or two-line display in order to configure
the Digital Telephone IP Adapter unit with the telephone display menu.
Notes:
1. Because it is a discontinued model, the M2616CT cordless digital
telephone set is no longer supported.
2. When you update the message on the host PBX that displays when the
digital telephone set is idle, you must unplug the digital telephone set and
plug it back for the change to take effect.
3. You must re-boot a Digital Telephone IP Adapter unit after unplugging and
re-plugging the telephone cord of its associated digital telephone set.
4. Auto Answer Back (AAB) activation on M26xx series digital telephone
sets on Remote Gateway 9100 Series units connected to CS2100 PBXs
does not produce a dial tone. The digital telephone sets operate properly,
but no dial tone is present. To produce dial tone in this situation, configure
the port on the RLC as a TAPI port.
!M2008D !M2616D !M3902 !M3905
!M2008HFD !M3310 !M3903
!M2216D !M3820 !M3904