Digital Telephone IP Adapter Installation and Administration Guide 95
January2005 Configuring the IP Adapter unit using the telephone menu
10 The telephone display asks if you want to modify the SPRE code that you
must dial to register for, or begin a work session, the registration SPRE
code, similar to the following:
Modify Reg. SPRE?
[1-Yes 2-No]
IF you want to THEN do the following:
modify the
number that you
must dial to begin
a work session (in
an ACD
environment, for
example),
1Press 1.
2Press the Hold key.
Result: The telephone display prompts you for a
new registration SPRE code. The telephone display
also shows the current registration SPRE code,
similar to the following:
Enter Reg. SPRE Code
#97
3 Press the digits of the new registration SPRE code.
Note: Refer to the Note on page 93 for information
on pound signs (#) in SPRE codes.
4Press the Hold key.
5 Proceed to step 11 on page 96.
retain the current
registration SPRE
code,
1Press 2.
2Press the Hold key.