86 Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 2.1
Exiting the system using the Release key
To exit the system at any time using the release key:
1Press the Release key to move up in the menu one level at a time until you
reach the top level.
Note: The Confirm Exit? message indicates that you have reached the
top level of the menu.
2The telephone display asks you to confirm your request to exit the
configuration menu, similar to the following:
Confirm Exit?
[1-Yes 2-No]
Note: If you exit the system without saving any changes you have made, your
changes will stay in active memory until the next system restart/reboot. After
this, your changes are lost.
IF you wish to THEN do the following:
continue working, a. Press 2.
b. Press the Hold key.
The telephone display continues, as though you had
entered a “No” response to the most recent option you
had on the menu.
stop working with
the telephone
menu,
a. Press 1.
b. Press the Hold key.
The following screen confirms that you have left
Remote Gateway 9100 Series configuration.
You are logged out.