Digital Telephone IP Adapter Installation and Administration Guide 89
January2005 Configuring the IP Adapter unit using the telephone menu
4The telephone display asks if you want to restore default values, si milar to
the following:
Restore Default Values?
[1-Yes 2-No]
IF you want to THEN do the following:
retain current
configuration
settings for this
Digital Telephone
IP Adapter unit,
1Press 2.
2Press the Hold key.
3 Proceed to step 5 on page 90.
revert Digital
Telephone IP
Adapter unit
configuration
settings to their
factory-set default
values,
1Press 1.
2Press the Hold key.
Result: The telephone display asks you to confirm
your decision, similar to the following:
Confirm?
[1-Yes 2- No]
3Press 1 to confirm your decision, or press 2 to retain
current settings.
4Press the Hold key.