88 Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 2.1
3Enter the digits 48378123 (GUEST123), the default password, or the
current password, if you have customized the passwor d, and then press the
Hold key.
Result: The telephone display asks if you want to display local IP
parameters:
Display Local IP?
[1-Yes 2-No]
IF you want to THEN do the following:
display read-only
IP parameters,
1Press 1.
2Press the Hold key.
Result: The telephone display shows the remote
site’s current IP address, similar to the following:
IP Address
192.168.142.102
3Press the Hold key.
Result: The telephone display shows the remote
site’s current IP subnet mask, similar to the
following:
IP Subnet Mask
255.255.255.0
4Press the Hold key.
Result: The telephone display shows the remote
site’s current IP gateway, similar to the following:
IP Gateway
192.168.142.254
5Press the Hold key.
6 Proceed to step 4 on page 89.
not display IP
parameters,
1Press 2.
2Press the Hold key.