60 Digital Telephone IP Adapter Installation and Administration Guide
Planning for installation Standard 2.1
Administering multiple nodes in the network
If you are responsible for administering one or more Digital Telephone IP
Adapter units and the RLC on the host PBX, you can access them and the RLC
from anywhere on the network.
Note: You do not have to install separate administration PCs for the RLC and
the Digital Telephone IP Adapter unit(s). You can use one administration PC to
administer all units in the Remote Gateway 9100 Series network.
Windows PC requirements
To use Configuration Manager, the administration PC must:
!be an IBM-compatible PC
!use a Windows 95, 98, NT Workstation 4.0, Millennium Edition (ME),
2000 Professional, or XP (Professional and Home Edition) operating
system with the Microsoft TCP/IP networking component installed
!be equipped with a CD-ROM drive
!be equipped with a 10BaseT Ethernet interface card (this provides access to
the Ethernet network)
!have an available COM port if you wish to use the RS-232 serial port to
establish a direct serial connection
!be equipped with a pointing device, such as a mouse
!have 32 Mbytes of RAM for Windows 95, 98, and ME, or 64 Mbytes of
RAM for Windows NT Workstation 4.0, 2000 Professional, and XP
(Professional and Home Edition
!have 48 Mbytes of available storage for Windows 95, 98 and ME, or 64
Mbytes of available storage for Windows NT Workstation 4.0, 2000
Professional, and XP (Professional and Home Edition)
Note: Configuration Manager does not support any of the Win32 Server
versions of Microsoft Windows.