Connecting to a Computer

ViewNX 2 starts automatically when the transfer is complete (default setting of ViewNX 2). Transferred images can be viewed.

For more information on using ViewNX 2, refer to the ViewNX 2 help information (A136).

Disconnecting the Camera

Do not turn off the camera or disconnect the camera from the computer during transfer.

When transfer is complete, open the slide cover and close it again to turn off the camera, and disconnect the USB cable.

The camera turns off automatically if there is no communication with the computer for 30 minutes while the camera is connected via the USB cable.

BCharging the Battery

Printers and Computers Televisions, to Connecting

The power on lamp slowly blinks orange while the battery inserted into the camera is charging (A137). 135