Adjusting the A(Auto) Mode Setting
Shooting on More
Preset manual is effective with mixed lighting or to compensate for light sources with a strong color cast (for example, to make pictures taken under a lamp with a red shade look as though they had been taken under white light).
Follow the procedure below to measure the white balance value according to the light source when shooting.
1Place a white or gray reference object under the lighting that will be used during shooting.
2Tap the bottom tab to display the
settings controls (A12) and tap w.
|
| T |
| OFF | AUTO |
|
| W |
| AUTO | 0.0 |
3 Tap b. |
| White balance |
The camera zooms in to the position for | Preset manual | |
measuring white balance. |
|
|
4 Frame the reference object in the | Measuring window |
|
|
| |
measuring window. |
|
|
|
|
|
|
|
|
|
| |
| Preset manual |
|
|
| |
|
|
|
|
| |
To apply the most recently measured value for preset manual, tap Cancel.
CancelMeasure
5Tap Measure to measure a value for preset manual.
The shutter is released and the new white balance value is set. No picture is recorded.
BNote on Preset Manual
Preset manual
CancelMeasure
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
60set White balance to Auto or Flash.