Connecting to a Printer

Televisions, to Connecting

Users of PictBridge-compatible (A187) printers can connect the camera directly to the printer and print pictures without using a computer.

Follow the procedures below to print pictures.

Take pictures

Select pictures for printing and number

of copies using Print set option

(A102)

Connect to printer (A139)

Print pictures one at a

Printers and Computers

time (A141)

Print multiple pictures (A142)

When printing is complete, turn camera off and disconnect the USB cable

BNotes on Power Source

•When connecting the camera to a printer, use a fully charged battery to prevent the camera from turning off unexpectedly.

•If the AC Adapter EH-62D (available separately) is used, COOLPIX S80 can be powered from a home electrical outlet. Do not use any other AC adapters as it will cause the camera to heat up or malfunction.

BNote on Printing Pictures

When printing pictures taken at an Image mode setting of p3968×2232 (default setting), the edges of pictures may be cropped, preventing printing of complete pictures.

It may be possible to print complete pictures if settings on the printer are applied so that borders are printed around pictures (borderless printing not enabled).

Refer to the documentation supplied with the printer or consult the digital photo lab for further details to make sure that the printer supports printing at an aspect ratio of 16:9.

DPrinting Pictures

In addition to printing pictures transferred to a computer from your personal printer and printing over a direct camera-to-printer connection, the following options are also available for printing pictures stored on the memory card:

•Insert a memory card into a DPOF-compatible printer’s card slot

•Take a memory card to a digital photo lab

To print pictures using either of these methods, use your camera’s Print set option (A102) to

138select the pictures, and the desired number of prints each, from those recorded to a memory card.