Adjusting the A(Auto) Mode Setting

Shooting on More

3Press the shutter-release button to take a picture.

The camera focuses on the focus area when the shutter-release button is pressed halfway. The focus area will glow green and focus will be locked.

1/250 F3.6

When the camera is unable to focus, the focus

area will blink. Press the shutter-release button halfway again to focus.

If the shutter-release button is pressed halfway while the focus area is not displayed, the camera automatically selects one or more of the nine focus areas containing the subject closest to the camera (A49).

Press the shutter-release button all the way down to release the shutter.

BNotes on Subject Tracking Mode

Digital zoom is not available.

The sound of the lens focus motor can be heard when the subject tracking function is working.

Adjust zoom and apply shooting settings (A53) before selecting the subject. If zoom or any other setting is adjusted after the subject has been registered, subject registration will be cancelled.

It may be impossible to register the desired subject, or the camera may be unable to track the registered subject or may begin tracking a different subject, if the subject is moving rapidly, if there is a significant amount of camera shake, or if the camera detects a similar subject. The camera’s ability to accurately track the registered subject is also dependent upon the size and brightness of the subject.

In some rare cases, subjects with which autofocus may not perform as expected (A29) may be out of focus despite the fact that the focus area glows green. In this situation, focus on another subject which is at the same distance from the camera as the intended subject while the shutter- release button is pressed halfway (A46).

There are functions with which this setting cannot be enabled. See “Camera Settings That cannot be Applied Simultaneously” (A76) for more information.

CTouch Shooting Setting

Subject registration with subject tracking will be canceled when the camera is turned off.

56