Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

 

Display

Problem

Solution

A

 

O(blinks)

Clock not set.

Set date and time.

148

 

 

 

 

 

 

B

Battery running low.

Prepare to charge or

14

 

replace battery.

 

 

 

 

 

 

 

 

 

 

N

Battery exhausted.

Charge or replace battery.

14

 

Battery exhausted.

 

 

 

 

 

 

 

 

 

 

 

 

Turn off camera, and allow

 

 

 

 

battery to cool down

 

 

P

Battery temperature is

before resuming use. When

 

 

Battery temperature

this message appears, the

19

 

high.

 

high

power-on lamp blinks

 

 

 

 

 

 

 

rapidly for five seconds and

 

 

 

 

the monitor turns off.

 

 

 

 

 

 

 

P

Inside of the camera or the

Leave the camera off until

 

 

the inside of the camera or

 

 

The camera will turn

memory card has become

 

 

the memory card has

–

 

off to prevent

hot. The camera turns off

 

cooled and then turn it on

 

 

overheating.

automatically.

 

 

again.

 

 

 

 

 

 

 

 

 

 

 

 

 

• Refocus.

28, 29

Technical

 

 

• Focus on another subject

46

Q(● blinks red)

Camera cannot focus.

positioned at the same

 

 

 

 

 

 

distance from the camera

 

Notes

 

 

as the intended subject.

 

 

 

 

 

 

 

Wait until message clears

 

and

P

 

from display automatically

 

Camera cannot perform

when recording is

 

 

 

Index

Please wait for the

 

other operations until

complete. Do not open the

–

camera to finish

 

 

recording is complete.

battery-chamber/memory

 

 

recording.

 

 

 

card slot cover during

 

 

 

 

 

 

 

 

recording.

 

 

 

 

 

 

 

u

Write-protect switch is in

Slide write-protect switch

 

 

Memory card is write

23

 

“lock” position.

to “write” position.

 

protected.

 

 

 

 

 

 

 

 

 

 

172